It’s not always a good thing to get bigger. As you mature as an adult, you will require larger clothing. If you don’t have the funds to purchase new dress shirts, the next best thing is to enlarge your current ones.
How to make a button-up shirt bigger: This is unfortunately not a recommended method. Making your husband’s clothing two sizes larger will take a lot of effort. Furthermore, the end product may not be as desirable as some wives would like.
Continue reading this article to understand how to make a men’s dress shirt bigger. While the process is complex and time-consuming, it is possible. Do you really want to attempt it now that you’ve read what we’ve discovered?
Can You Make a Button-up Shirt Bigger?
Trying to stretch out a button-up shirt is the simplest method to make it bigger. However, similar to resewing a dress shirt, the effects may not be as pleasing or as effective.
The next most basic way is to just move the buttons. Bringing them closer to the shirt’s edge will give it a little more width, but it won’t expand the size by two sizes.
After you’ve moved the buttons, cut the center back of the shirt all the way up to the yoke. Prepare your insert panel and pin it in place after pressing the rough edges in approximately a 1/2 inch.
Sew the panel into place after that, removing the pins as you go. Trim away any excess fabric and you’ll have a little larger shirt. Matching the insert fabric to the pattern of the dress shirt is one of the issues with this procedure.
It will take a lot of patience to match up the look and sew it into place perfectly without losing the design.
How to Make a Men’s Dress Shirt Bigger
If the garment is new and can be returned, the most obvious and cheeky response to this question is to do so. Simply order a larger size of the shirt. This is the most effective way to enlarge a man’s dress shirt. It will save you time, money, and frustration.
However, if you are set on making a larger shirt, be prepared to put in a lot of effort. The shoulders, cuffs, and collar will be the most problematic regions. The good news is that if you’re willing to deal with the negative aspects, you can make your spouse’s shirt bigger.
Remove the cuffs carefully without harming or leaving the raw edges. These edges should not be ironed flat.
Second, on the body of the shirt and along each arm’s long sleeves, open up the side seams. The sleeves should not be separated from the shoulders, but the underarm seams on both sleeves should be opened up.
Third, prepare your insert fabric by matching it as closely as possible to the design. Pin the insert fabric into all of the spaces you’ve just created. Allow only a quarter-inch seam allowance.
Fourth, using a zig-zag stitch, sew the insert fabric into place. Replace the cuffs by slipping the raw edge over the sleeve’s raw edge. You can wind up shoving the raw edge of the bigger sleeve into the cuff.
Finally, secure the cuff with a stitch. It might work, but the end outcome might not be what you want.
Can You Make a Dress Shirt Neck Bigger?
This will be a less difficult task than enlarging the dress shirt. Because textiles shrink in the wash or the dryer, adjusting the neck is a popular sewing adjustment.
There is no sewing involved in the procedure we are about to describe. It’s a simple, safe approach for making your husband’s dress shirts fit better after they’ve shrunk. Purchase a collar extender as the first step.
Most men’s clothing retailers with a big assortment of dress shirts should carry them. Put the collar extender on the shirt you wish to increase the neck when you get it home.
The loop side of the extension is then placed over the top button on your collar. After that, insert the stud side into the matching hole. The last step is to knot your shirt, and your shirt will look brand new.
Moving the button closer to the edge of the collar is another option to lengthen the neck. When your pants have’shrunk,’ this approach works on the waistline, and it should also work on the neckline.
How to Make Dress Shirt Collar Bigger
You can get a tool that will complete the task for you. However, how well it will operate is an open subject, and we cannot promise that it will meet your expectations. When you need to make a shirt bigger, collars might be challenging.
The instrument in question is a collar stretcher, which is not a difficult or sophisticated device to operate. All you have to do is wrap the collar around the stretcher as directed and twist the knob until the collar stretches slightly.
Because you can only stretch a shirt collar so far before damaging the threads and fibers, this will be a long process. It may take several tries to get the collar to stretch to your desired length.
This approach has only one drawback. This device may not be available at any store. After looking at a photograph on Amazon, we discovered that the marketplace does not sell one.
If you can’t find a collar stretcher, one collar stretching expert suggested using a hat stretcher instead. Nobody knows how well a hat stretcher will work. When it comes down to it, either the collar extender or a larger shirt will suffice.
How to Make a Button-up Shirt Bigger Without Sewing
This procedure will most likely be the same for any shirt that requires stretching. The first step is to assess whether or not the cloth used to make the shirt can be stretched.
It’s pointless to try to stretch a shirt when the fabric won’t stretch. Here are the steps you can take, but bear in mind that this method may not give you the extra two sizes you desire.
Fill a tub halfway with cool water. Cool rather than hot or frigid. The hot will merely keep the fibers from expanding, while the cold will not dissolve the conditioner.
Step 2 – Stir in about 1/4 cup of hair conditioner to the water until it is completely combined and no lumps or clumps remain. This procedure will work with any hair conditioner, so go for a cheap one.
Step 3 – The conditioner softens the shirt fibers, allowing you to stretch them out even further. When you’ve mixed the conditioner, don’t rumple the shirt before adding it to the mixture. Because you want the conditioner to soak into the shirt’s entire surface, lay it flat with no overlapping sleeves, etc.
Step 4 – The shirt must be submerged equally for 15 minutes.
Step 5 – After 15 minutes, drain the water and conditioner from the tub and replace it with cool, fresh water. Squeeze the garment to remove all of the old conditioned water, then soak it for another 5 minutes.
Step 6 – Squeeze the excess water off the garment and put it flat on some fresh towels. Pull down gently with one hand on the neck and the other on the bottom hemline to lengthen the length. Pull the fabric from left to right until you have an inch or two of extra length.
Step 7: Now stretch the shirt to its full width. Pull the borders of either side of the garment in different directions with one hand. You should tug carefully this time to avoid damaging the clothing.
To get an uniform stretch, make sure your hands are level with each other as you pull. To extend the sleeves, hold the cuff and gently pull down, keeping your other hand up at the top.
Step 8: When you’re finished, hang the shirt to dry on the towels. This will assist it in maintaining its new shape.
Do My Cotton Dress Shirts Get Looser/Bigger Over Time?
They do, unfortunately. While this may be advantageous if you gain a size or two, it is not always a desirable shirt feature. The stretching indicates that the cotton used to make the shirt was not of the highest quality.
The loose weave of the shirt or fabric is another reason why cotton will stretch. The best strategy to stop your cotton shirts stretching is to only buy shirts made of high-quality cotton.
Although the stretching may not be completely stopped, it should be greatly reduced. Cotton will also shrink if not handled correctly. Even high-quality cotton shrinks, and pre-shrunk shirts may not actually be pre-shrunk at all.
Only the fibers of pre-shrunk cotton shirts may have shrunk, not the fabric after it was woven or the shirt after it was produced. When something indicates it was pre-shrunk, be cautious.
Different Methods to Stretch a Cotton Shirt
A cotton shirt can be stretched in a variety of ways. These techniques are intended for various cotton shirts and may not work as well on formal shirts. You may need to conduct a trial and error experiment to determine which ones will or will not work for you.
1. The conditioner stretch – we’ve already covered this technique, so we won’t go over it again. If you have the time and patience to use it, it works.
2. The iron stretch is achieved by wetting your shirt and ironing it on a low to medium heat setting. With one hand, iron the shirt while pulling on it with the other. You might want to add some weight to your shirt to keep it in place as you work.
3. The shower stretch – this method uses no conditioner or iron. Simply wet your shirt in the shower, then put it on and wear it all night. Tugging at tight spots is acceptable.
4. The weight stretch – this method manipulates the shirt with simple hand weights. Or you can put different items inside the shirt if you do not want to wear a wet garment all night.
5. The chair stretch – wet the shirt and drape it over a chair. This method works okay if you are really gentle. The chair stretch has the danger of ruining the fibers and the shirt.
Making a dress shirt larger is not always the best idea to have. It is going to be complicated, time-consuming and the results may be something fit for a carnival sideshow. You can try to do it but don’t be disappointed if the results do not work according to your expectations.
If you need to stretch a dress shirt, simply buy a new one and save yourself the trouble and the embarrassment.